A fine Japanese striking ‘Makura-Dokei’ table clock with calendar, circa 1850.

Description

Japanese timekeeping

Until 1873 Japanese timekeeping differed from ours in the West. The day that started with sunrise and ended with sunset was divided in six equal parts. Just as the night that was started at sunset and ended with sunrise. That meant that the day ‘hours’ lasted longer in the summer and were shorter in the winter. And vice versa for the night hours. This so-called temporal timekeeping might appear unlogical to us. But in a society that depends on daylight for its living and working it is practical. One would get up at sunrise, worked with daylight and went to bed when the sun got under. Mechanical clocks were already introduced in the second half of the 16th century by Portugese Jezuit monks. These clocks were mostly from English and Dutch make since the Portugese didn’t have their own clockmaking tradition. Using these as examples the Japanese started to create clocks themselves but had to adapt theirs to the seasonal changing duration of the hours. They divised several systems which enabled them to show the correct temporal time. With this table clock the dial revolves once every 24 hours while the silver numerals can be moved to the correct position to indicate the correct time. Besides this technical ingenuity, it is the outstanding quality of the workmanship with which the clock and case were made. The losely engraved flowers which are engraved on the case have this typical Japanese quality to omit all that is superfluous. This could also be stated about the wooden outer case that is beautifully understated and of perfect proportions.

dial

The revolving dial has engraved plaques for the toki and plain plaques for the half toki. The day-toki are silver, the night-toki blued. It revolves across a fixed foliate pierced blued hand. The dial is set in a finely engraved brass dial adorned with flowers. Above there are two apertures for the calendar.

Balance

The movement has plates which are connected by finely turned baluster pillars. The going train is driven by a spring barrel in combination with a fusee and chain and is of one day duration. It is being regulated by verge escapement in combination with a balance. The clock has countwheel striking on a bell. Japanese clocks strike the six toki starting with 9 and ending with 4. The half toki’s are indicated with alternating single and double strikes. The top- and bottom plate are connected with turned corner pillars. There is similar engraving on the back- and top plate. The whole is mounted on a wooden plinth containing a small drawer in which the winding key is stored.

Wisteria

The brass clock with its wooden base is placed in a sleek wisteria wooden outer case surmounted by a hinged brass handle. Both front and back panel have fine mouldings and can be slid up. All sides have glass panels and the front has an engraved front fret.